Identification and purpose
Wear Resistant Custom Solid Lubricated Steel Bushings for Industrial Equipment— steel bushing with solid lubricant. Supporting, guiding or hinge unit of equipment. The exact installation location is confirmed by the assembly drawing.
The card refers to one independent item: its name and images are considered together, without adding photos or parameters of adjacent products.
Confirmed position characteristics
- Product type:Steel bushing with solid lubricant
- Model/Series:not indicated in the individual name
- Dimensions:are specified by a drawing of a specific position
- Material:not indicated in the individual name
- Hardness:exact value not specified
- Standard:a separate standard is not indicated in the name
Values missing from an individual name are not replaced by general numbers for the product group.
Design and working unit
The name states a self-lubricating design or solid lubricant. The working layer, the geometry of inclusions and the permissible sliding mode require separate confirmation; they are not replaced by the characteristics of a conventional hardened bushing.
- The design calls for solid lubrication; its composition and location cannot be determined from the data of another bushing.
- Dimensions are specified by order; a similar image does not replace an individual drawing.
Data for technical approval
Before calculating and starting production for this position, it is necessary to fix:
- outer and inner diameters, length and fit tolerances
- mating part, working gap and installation method
- material, heat treatment, roughness and coating
- load, movement, contamination and maintenance regime
- material and geometry of the self-lubricating working layer
Control and acceptance of the batch
Acceptance criteria are determined by the drawing and order. For this item, the control chart should separate the confirmed requirements from the preliminary ones:
- critical dimensions and tolerances with reference to position drawing
- identification of material according to the agreed document
- condition of the working surface, edges and installation areas
- marking, quantity and surface protection during packaging
Compatibility and Request Kit
Interchangeability is confirmed not by a photograph, but by the coincidence of the drawing, fits, associated parts and working conditions. To request, please attach a drawing or measured sample, specify the equipment designation, dimensions with tolerances, material, required processing, quantity and control program.
